VOLTAGE LOAD SHEDDING CONSIDERING VOLTAGE SENSITIVITY AND REACTIVE POWER

Authors

  • EBADOLLAH AMOUZAD MAHDIRAJI Department of Engineering, Islamic Azad University, Sari, Iran.
  • MOJTABA SEDGHI AMIRI Department of Research and Development, Neka Power Generation Management Company, Mazandaran, Iran.
  • SEYED MOHAMMAD SHARIATMADAR Electrical Engineering Department, Islamic Azad University, Naragh, Iran.

Keywords:

voltage stability, voltage load shedding, effective bus, reactive power, voltage sensitivity

Abstract

Load shedding is the last reaction to control and stabilize the power system in the event of a disturbance. Determining the location and amount of load shedding is one of the issues that has always plagued the users of the power system. In this paper, a new method is proposed to determine the appropriate bus for voltage load shedding. In the proposed method, unlike the previous methods, two indices of voltage sensitivity to active power and reactive power are used many times to determine the appropriate bus for voltage load shedding. Considering the reactive power many times in the process of determining the appropriate bus for voltage loading causes more reactive power to be cut off in the initial stages of voltage loading and the voltage profile is improved. As a result, less active power is cut off by voltage load shedding. The proposed method is implemented together with the method based on voltage sensitivity to active power in the IEEE 118-bus test network and the New England 39-bus network to test the correctness of the proposed method. The results of the paper show the superiority of the proposed method over the voltage sensitivity method to active power.

References

Abed, A.M. (1999): WSCC voltage stability criteria, undervoltage load shedding strategy, and reactive power reserve monitoring methodology. – In 1999 IEEE Power Engineering Society Summer Meeting, Conference Proceedings (Cat. No. 99CH36364) 1: 191-197.

Abedini, M., Sanaye-Pasand, M., Azizi, S. (2014): Adaptive load shedding scheme to preserve the power system stability following large disturbances. – IET Generation, Transmission & Distribution 8(12): 2124-2133.

Ahmadi, A., Alinejad-Beromi, Y. (2015): A new integer-value modeling of optimal load shedding to prevent voltage instability. – International Journal of Electrical Power & Energy Systems 65: 210-219.

Amouzad Mahdiraji, E. (2020): Optimal Switching of Micro-grid Distributed Management based on Equilibrium Models. – Signal Processing and Renewable Energy 4(3): 67-80.

Amouzad Mahdiraji, E., Sedghi Amiri, M. (2020): Locating, Sizing, and Optimal Planning of the Distribution Substations Using Vanadium Flow Battery Storage to Improve the Efficiency of the Power Distribution Network. – International Journal of Smart Electrical Engineering 9(01): 13-21.

Amouzad Mahdiraji, E., Shariatmadar, S. M. (2019a): Locating and Offering Optimal Price Distributed Generation Resources to Increase Profit Using Ant Lion Optimization Algorithm. – International Journal of Smart Electrical Engineering 8(04): 143-148.

Amouzad Mahdiraji, E., Shariatmadar, S.M. (2019b): A New Method for Simplification and Reduction of State Estimation’s Computational Complexity in Stability Analysis of Power Systems. – International Journal of Smart Electrical Engineering 8(02): 51-58.

Amouzad Mahdiraji, E., Shariatmadar, S.M. (2019c): Improving the Transient Stability of Power Systems Using STATCOM and Controlling it by Honey Bee Mating Optimization Algorithm. – International Journal of Smart Electrical Engineering 8(03): 99-104.

Amouzad Mahdiraji, E., Mohammadi Shah Kilah, S., Hosseini, A.S. (2018): Locating Single phase to Ground Fault in Three-Phase Underground Power Cables Using Modal Theory and Fourier Transform. – Journal of Organizational Behavior Research 3(2): 2528-9705.

Arief, A., Dong, Z., Nappu, M.B., Gallagher, M. (2013): Under voltage load shedding in power systems with wind turbine-driven doubly fed induction generators. – Electric Power Systems Research 96: 91-100.

Arief, A., Nappu, M.B., Gallagher, M., Dong, Z.Y. (2011): Under voltage load shedding utilizing trajectory sensitivity to enhance voltage stability. – In AUPEC 6p.

Brown, W.E., Moreno-Centeno, E. (2020): Transmission-line switching for load shed prevention via an accelerated linear programming approximation of AC power flows. – IEEE Transactions on Power Systems 35(4): 2575-2585.

Gu, W., Liu, W., Zhu, J., Zhao, B., Wu, Z., Luo, Z., Yu, J. (2014): Adaptive decentralized under-frequency load shedding for islanded smart distribution networks. – IEEE Transactions on Sustainable Energy 5(3): 886-895.

Hamid, M.H.A., Hashim, H., Rashid, H.A.A., Abidin, I.Z. (2014): Under voltage load shedding using voltage stability indices. – In 2014 IEEE Innovative Smart Grid Technologies-Asia (ISGT ASIA) 4p.

Hatziargyriou, N.D., van Hecke, J., van Cutsem, T. (1994): Indices for Predicting Voltage Collapse Including Dynamic Phenomena. – CIGRE 94p.

He, P., Wen, B., Wang, H. (2019): Decentralized adaptive under frequency load shedding scheme based on load information. – IEEE Access 7: 52007-52014.

Kaffashan, I., Amraee, T. (2015): Probabilistic undervoltage load shedding using point estimate method. – IET Generation, Transmission & Distribution 9(15): 2234-2244.

Kundur, P., Paserba, J., Ajjarapu, V., Andersson, G., Bose, A., Canizares, C., Hatziargyriou, N., Hill, D., Stankovic, A., Taylor, C., Van Cutsem, T. (2004): Definition and classification of power system stability IEEE/CIGRE joint task force on stability terms and definitions. – IEEE transactions on Power Systems 19(3): 1387-1401.

Lei, J., Li, Y., Zhang, B., Liu, W. (2014): A WAMS based adaptive load shedding control strategy using a novel index of transient voltage stability. – In Proceedings of the 33rd Chinese Control Conference 5p.

Lytvynchuk, V.A., Kaplin, M.I., Bolotnyi, N.P. (2019): The method of design an optimal under-frequency load shedding scheme. – In 2019 IEEE 6th International Conference on Energy Smart Systems (ESS) 4p.

Mahari, A., Seyedi, H. (2016): A wide area synchrophasor-based load shedding scheme to prevent voltage collapse. – International Journal of Electrical Power & Energy Systems 78: 248-257.

Mahdiraji, E.A., Amiri, M.S. (2021): Optimization of Electric Vehicles Along with Power Generation Units to Improve Microgrid Reliability. – Quantum Journal of Engineering, Science and Technology 2(2): 1-15.

Mehrabi, K., Golshannavaz, S., Afsharnia, S. (2019): An improved adaptive wide-area load shedding scheme for voltage and frequency stability of power systems. – Energy Systems 10(3): 821-842.

Mollah, K., Bahadornejad, M., Nair, N.K., Ancell, G. (2012): Automatic under-voltage load shedding: A systematic review. – In 2012 IEEE Power and Energy Society General Meeting 7p.

Sasikala, J., Ramaswamy, M. (2011): Fuzzy based load shedding strategies for avoiding voltage collapse. – Applied Soft Computing 11(3): 3179-3185.

Shun, L., Qingfen, L., Jiali, W. (2016): WAMS based dynamic optimization of adaptive under-frequency load shedding. – Power System Protection Control 44(13): 48-54.

Tang, J., Liu, J., Ponci, F., Monti, A. (2013): Adaptive load shedding based on combined frequency and voltage stability assessment using synchrophasor measurements. – IEEE Transactions on power systems 28(2): 2035-2047.

Wang, Y., Pordanjani, I.R., Li, W., Xu, W., Vaahedi, E. (2011): Strategy to minimise the load shedding amount for voltage collapse prevention. – IET generation, transmission & distribution 5(3): 307-313.

Xu, Y., Dong, Z.Y., Luo, F., Zhang, R., Wong, K.P. (2014): Parallel-differential evolution approach for optimal event-driven load shedding against voltage collapse in power systems. – IET Generation, Transmission & Distribution 8(4): 651-660.

Downloads

Published

2021-12-04

Issue

Section

Articles

How to Cite

VOLTAGE LOAD SHEDDING CONSIDERING VOLTAGE SENSITIVITY AND REACTIVE POWER. (2021). Quantum Journal of Engineering, Science and Technology, 2(6), 55-72. https://qjoest.com/index.php/qjoest/article/view/43